AZ76 Lift-Type Vibratory Wheel Polishing Machine
- Technical Data
- Video
| Rim size | 12″-24″ |
| Barel diameter | 960mm |
| Qty for Media | 200kg/Barrel |
| Media For fine polishing/Buffing | 3-3.5mm “Zirconia toughened alumina balls” |
| Voltage | 220V/380V;50HZ/60HZ;1Ph/3ph |
| Motor power | Shaking barrel:3KW Turntable motor:0.75KW |
| N.W. | 400KG(Machine weight ) 200KG (Media weight) |
| Packing size | 1120*1320*2300MM |
Related Products
Lift-Type Vibratory Finishing for Wheels
The AZ76 combines a lift-type wheel-processing arrangement with vibratory media finishing. It can be reviewed for polishing and cleaning suitable wheel surfaces. Match the workpiece fixture, media, and process settings to the wheel material, coating condition, and required result.
The specification lists a 12–24 inch rim range and a 960 mm barrel diameter. Confirm wheel width, offset, weight, mounting position, and clearance throughout loading and processing. The stated diameter range does not establish suitability for every wheel design.
Media Selection and Surface Preparation
The technical data lists 3–3.5 mm zirconia-toughened alumina balls for fine polishing or buffing, with a media quantity of 200 kg per barrel. Establish the actual media charge and working level for the supplied machine and wheel.
Identify paint, powder coating, plating, corrosion, and contamination before planning preparation. Polishing, rust removal, and cleaning require different process assessments; do not assume one media recipe performs all three on every surface. Check media lodging, finish consistency, and critical edges in a trial.
Drive and Electrical Requirements
The data sheet lists a 3 kW vibrating-barrel drive and a 0.75 kW turntable motor. The listed supply options include 220 V or 380 V, 50 Hz or 60 Hz, and single- or three-phase arrangements. Confirm the supplied voltage, phase, frequency, controls, and protection for your workshop.
The listed machine weight is 400 kg, with a separate media weight of 200 kg. Include the actual operating load when reviewing installation requirements. The 1120 × 1320 × 2300 mm packing size is a transport dimension; confirm the installed envelope, lift clearance, and maintenance access separately.
Information for an AZ76 Quote
Send the wheel material, dimensions, weight, mounting details, incoming surface photographs, required finish, and wheels per day. Discuss fixtures, loading, media, liquid handling, controls, and representative sample processing with Inovatec.