- CNC machining of suitable alloy wheel faces during refurbishment.
- WRC28, WRC28VM, YN-26, and WRC30 models for different workshop requirements.
- Select capacity, clamping, tooling, and controls for your wheel range.
- Related wheel equipment: wheel powder coating equipment, wheel vibratory finishing, wheel blasting cabinets.
CNC Alloy Wheel Diamond Cutting Machines
Inovatec supplies CNC wheel lathes for diamond-cut alloy wheel refurbishment. The machine follows the wheel-face profile and removes a controlled amount of material to produce a machined finish. Choose the model around wheel dimensions, loading access, clamping, and the approved repair process. Cleaning, straightening, and final coating are separate operations.
Related Equipment and Media Resources
See Cnc wheel machine, Wheel lathe machine, Wheel turning machine.
The WRC28 is a CNC wheel lathe with a listed 7.5 kW motor and cast iron base. It machines the face of a suitable alloy wheel using the selected tooling and program. Confirm the wheel envelope, fixtures, and control configuration before ordering.
The WRC28VM uses a vertical wheel-lathe arrangement with hardened columns and slide guideways. The listed maximum spindle speed is 1,500 rpm. Select operating speed and cutting conditions for the wheel, tool, and approved machining procedure; confirm wheel clearance for the quoted model.
The YN-26 is an economical computerized wheel lathe in the 26-inch model range. Check the full wheel dimensions, chuck arrangement, tool access, and required controls. Diamond cutting is a machining operation and does not replace wheel cleaning or structural inspection.
The WRC30 is listed for wheels up to 30 inches, with an 11 kW motor and automatic spindle-speed control. The stated maximum spindle speed is 1,500 rpm. Confirm usable clearance, clamping, and the supplied configuration for your wheel range.
Wheel Lathe Features and Options
A manual tailstock can provide additional support where the setup requires it. Confirm compatibility with the wheel fixture, loading method, and cutting access. Its use depends on the machine configuration and approved setup procedure.
A three-jaw chuck provides the wheel-clamping arrangement for compatible setups. Confirm the supplied jaws and fixtures for your wheels. Operators must check seating, clamping, and clearance before running the machining cycle.
The GSK control option supports CNC operation. Ask which probing, profile, program, and operator functions are included in the current configuration. Confirm software requirements and training rather than relying on a fixed operating-system version or an unlimited program-storage claim.
The cooling system supplies coolant during machining where required by the process. Choose the coolant and maintenance routine according to the machine and tooling instructions. Check the supply, filtration, and condition of the fluid during use.
Automatic lubrication supplies designated machine points in the configured system. Inspect lubricant level and delivery according to the machine instructions. Refill intervals depend on use and the specified maintenance schedule.
A six-station turret holds the tooling specified for the machining setup. Confirm the supplied tools, holder compatibility, and station functions in the quotation. Select tools and offsets for the wheel-face profile and approved process.
Wheel Straightening as a Separate Operation
If your refurbishment process also includes straightening, assess that requirement separately from diamond cutting. A wheel straightening machine addresses suitable deformation within the approved repair procedure; a CNC lathe machines the visible wheel face. Inspect wheel condition and repair history before selecting either process.
Related Equipment and Media Resources
- Send the minimum and maximum wheel diameter, width, weight, and photographs of representative wheels.
- Describe the required finish, expected workload, wheel-fixture requirements, and operator experience.
- Confirm the electrical supply, workshop space, loading arrangement, controls, tooling, and support needed.
- Factory
- Before & After
The minimum order is one machine. Specify the model and required options so the quotation identifies each item included in your order.
Machines are packed in wooden boxes for export. Ask for the packed dimensions, weight, and handling requirements when arranging transport.
The stated standard terms are a 30% deposit by T/T, with the balance paid before shipment. Confirm the terms in your quotation; any alternative payment arrangement must be agreed before ordering.
Contact Inovatec with the model and configuration you need. We will confirm current availability, preparation or production time, and the proposed shipping arrangement in the quotation.
Shipment can be arranged through ports such as Ningbo, Shanghai, Tianjin, or Qingdao, depending on the order and freight plan. Delivery to another supplier in China for consolidation can also be discussed. Confirm the destination, handling requirements, and freight scope before ordering.
CNC Alloy Wheel Diamond Cutting Machines: Process and Equipment Selection
Inovatec supplies CNC wheel lathes for diamond-cut alloy wheel refurbishment. The machine follows the wheel-face profile and removes a controlled amount of material to produce a machined finish. Choose the model around wheel dimensions, loading access, clamping, and the approved repair process. Cleaning, straightening, and final coating are separate operations.
In This Guide
- What does a diamond cutting machine do?
- Does diamond cutting clean the wheel?
- How does a wheel CNC lathe relate to diamond cutting?
- Which wheel sizes can the machine accept?
- What should operators check before machining?
- Which models are available in this range?
- When should I consider a vertical wheel lathe?
- Can one machine carry out the whole refurbishment process?
- How long does a diamond cutting cycle take?
- What information is needed for an order?
What does a diamond cutting machine do?
A CNC wheel lathe machines the visible alloy wheel face with an appropriate cutting tool. A controlled machining pass follows the specified profile and removes material to create the required finish. The machine configuration, tooling, and program must suit the wheel and approved refurbishment procedure.
Does diamond cutting clean the wheel?
Diamond cutting is machining, rather than a general cleaning method. Remove contaminants and inspect the wheel before setup. Stripping, washing, surface preparation, straightening, and final coating require their own equipment or process steps.
How does a wheel CNC lathe relate to diamond cutting?
A wheel CNC lathe is the machine used for this controlled turning operation. The terms wheel lathe and diamond cutting machine often refer to the same equipment family. Check the actual probing, controls, tooling, and clamping supplied, rather than choosing from the name alone.
Which wheel sizes can the machine accept?
Capacity varies by model. The range includes the YN-26 for the 26-inch class and WRC30 equipment listed for wheels up to 30 inches, alongside WRC28 and WRC28VM models. Diameter alone is insufficient: confirm wheel width, fixture clearance, offset, weight, and tool access with the selected machine.
What should operators check before machining?
Inspect wheel condition and repair history, and confirm that the intended machining is permitted by the approved repair procedure. Use trained operators, the specified fixtures, machine guarding, and the manufacturer’s setup instructions. Check clamping, offsets, and clearance before the cycle. Do not assume that a machined appearance establishes structural suitability.
Which models are available in this range?
The listed range includes WRC28, WRC28VM, YN-26, and WRC30 wheel CNC lathes. Compare wheel clearance, machine arrangement, motor and spindle specifications, controls, tooling, and support. Ask for a quotation identifying the exact model and included options.
When should I consider a vertical wheel lathe?
Evaluate a vertical arrangement around loading access, wheel support, operator workflow, and the available floor space. Its value depends on your wheel mix and setup. Compare the actual configuration and representative wheel loading rather than assuming one orientation is always better.
Can one machine carry out the whole refurbishment process?
A wheel lathe performs the machining stage. Cleaning, approved straightening, abrasive preparation, coating, curing, and inspection are separate requirements. Define the complete workflow first, then select the equipment needed for each stage.
How long does a diamond cutting cycle take?
Cycle time depends on inspection, clamping, profile preparation, tool setup, cutting conditions, and the permitted material removal. Loading and subsequent finishing also affect workshop throughput. Evaluate representative wheels to establish a usable production estimate; a fixed time per wheel cannot be assumed from the model name.
What information is needed for an order?
Provide the wheel range, required finish, expected workload, utilities, and loading requirements. The quotation should identify the model, fixtures, controls, tooling, packing, delivery, and support. The stated standard payment terms are a 30% T/T deposit and the balance before shipment, subject to the agreed quotation.
Equipment and Finish Examples
