Single Disc Automatic Centrifugal Disc Finishing Machine for Deburring and Polishing

Centrifugal disc finishers work much faster than conventional tumblers at a lower cost. It also results in a better quality of polishing than most other polishing machines.

automatic-centrifugal-disc-finishing-machine-drawing

 

ModelCapacitySize LxWxHMotorWeightSpeedChamber DimensionPU Thickness
(L)(mm)(kw)(kg)(rpm)(mm)(mm)
CD120Q1202060x1700x1300411000-18064026
CD120Qx2120×23650x2200x13504.0×220200-18064026
CD2302303200x2700x18007.520000-16080030
CD230x2230×24500x3340x18007.5×240000-16080030

 

Automatic Centrifugal Disc Finishing Machine

An automatic centrifugal disc finishing machine has a competitive advantage over vibratory tumblers in terms of processing cycles.

Product Description

The automatic centrifugal disc finishing is primarily used for polishing a lot of products like plastic eyeglass frames, chain links, watch links, washers, and so on. The machine has a variable frequency drive to let you adjust the strength of the centrifugal force.

Centrifugal disc finishing machines made by Inovatec come in many variants. The 120-liter capacity and the 230-liter capacity are commonly found ones. But  50-liter capacity and 8-liter capacity variants can also be provided to better suit your needs. All of these machines come in either single-barrel or double-barrel design.

Features

  • Adjustable frequency of the spin
  • Process timer for controlling time
  • PU lining made from Dow Chemical sourced from the USA
  • Loading dock
  • Water removal once finished
  • The barrel discharge is hydraulic
  • Single/double-barrel design

Application

  • Used for finishing casting, stampings, and machined parts
  • Parts with a maximum size of 150mm
  • Parts that measure over 1mm in thickness

Single Disc Centrifugal Disc Finishing Machine Introduction

High-energy fully automatic centrifugal disc finishing machine is excellent for deburring, surface finishing, edge rounding as well as shinning/polishing for small to medium-sized stamping components, castings parts as well as machined components.

It is an automatic mass finishing machine for metal parts batch deburring and polishing.

One of the key advantages is the relatively short processing time and a high degree of automatic control.

The application is of a wide range from precision components, thin parts with thickness from 0.5mm to size with 150mm

In recent years, greatly improve labor cost and automatic surface finishing solution have to gain daily importance with industries.

Inovatec various processing techniques combined with 30 years’ practical experience have complete prove for this trend.

High-energy fully automatic centrifugal disc finishing machine is excellent for deburring, surface finishing, edge rounding as well as shinning/polishing for small to medium-sized stamping components, casting parts as well as machined components.

One of the key advantages is the relatively short processing times and a high degree of automatic control.

The application is of a wide range from precision components, thin parts with thickness from 0.5mm to size with 150mm

centrifugal disc finishing with ceramic media

 

Single Centrifugal Disc Finishing Machine Working Principle

The centrifugal force for rotating disc moves components and finishing media upward to the processing bowl while offering high kinetic energy to move forward.

As components and media relative movement and kinetic energy loss on the way, the mass falls back at the center of the rotating disc where centrifugal force moves it again.

The process parameter can be varied according to disc RPM, the water level in the work bowl, media to be used as well as a compound to be used, so the processing result can vary from gentle surface grinding and polishing to fast deburring processing.

Compared with a conventional vibratory finishing machine, the centrifugal disc finishing machine provides 10 to 20 times higher productivity in respect of product production capacity.

Centrifugal disc finishing machine automatic unloading

 

Automatic Centrifugal Disk Finisher Features:

1. Processing bowl

  • The waterproof, blasting strengthened high-precision disc bearing with the easy adjustment of the gap
  • The PU material is made from USA DuPont with high wear-resistant for the lining of disc and processing bowl
  • Stainless steel water/compound tap for constant supplying of compound and water rinsing.

2. Intermediate vibratory hopper

  • Intermediate vibratory hopper controlled by PLC program which accommodates the processing bowl media discharging
  • Optional PLC controlled hydraulic up and down tilting for easy unloading
  • Optional anti-sticking hopper texture for thin and precision parts

3. Vibratory screen

  • Optional vibratory speed control with inverter for motor
  • Multi-screen, easy to change screen available for different components
  • Extended screen is available

4. Media return conveyor

  • Powerful vibratory media return conveyor with pneumatic horizontal movement
  • Optional removal of undersize media

5. Hydraulic station

  • Center hydraulic station for all movements which involves hydraulic movement including loading hopper, intermedia conveyor as well as processing bowl

6. Water/compound dosing system

  • PLC controlled water and compound supply
  • Recycling model/flow-through model available
  • Clean water rinsing function available

7. Electric control box

  • Fully automation system controlled by PLC program with touch screen
  • Multiple programs available for different components
  • Error message for alarming
  • Variable parameter display for each movement

8. Media/parts loading hopper

  • Transfer of media and components from hopper to processing bowl gently
  • Optional spray for anti-adhesion of components

9. Sturdy metal frame

  • High-performance rusting resistant coating with a sturdy foundation
  • Easy to separate and transport
  • Deburring machine polishing machine buffing machine
Send Your Inquiry Today
Scroll to Top
Send this to a friend