WRC28 CNC Alloy Wheel Diamond Cutting Lathe
- Technical Data
- Standard Configuration
- Video
| Model | WRC28 |
| Max. swing over bed | Φ770mm (30’) |
| Max. size of alloy wheel | Φ720mm (28’) |
| Adjustable stroke of carrier in X direction | 100mm |
| Cross slide travel | 390mm |
| Width of the rail | 300mm |
| Length of the rail | 1300mm |
| Size of the 3-jaw chuck | 12’ |
| Range of spindle speed | 50~2000rpm |
| Spindle speed control | Automatic |
| Spindle bore | Φ82mm |
| Taper of spindle bore | 1:20 (Φ90) |
| Max. size of tool post | 25×25mm |
| Stations of tool carrier | 4 position |
| Min. setting unit of motor | (Z) long 0.001mm (X) cross 0.001mm |
| Moving speed of post | (Z) long 8m/min (X) cross 6m/min |
| Motor power | 7.5kw |
| Machine base | Whole cast iron base |
| Machine size (L*W*H) | 2140*1600*1860mm |
| Packing size | 2300*1750*2100mm |
- Diamond tool holder
- Three-jaw manual chuck (one pair of special soft jaws)
- Ruby digital probe
- Taiwan new generation CNC system
- Common quick-change tool holder, four-station
- Automatic lubrication system
- Cooling system
- Full protection (safety protection door)
- Common tools and toolboxes
- Dedicated hub curve optimization software
Related Products
Profile Measurement and Diamond Face Cutting
The WRC28 is a CNC lathe for machining suitable alloy wheel faces. Its listed configuration includes a ruby digital probe, a diamond toolholder, wheel-curve optimization software, and a four-position quick-change toolholder. Review the probe, cutting tool, and software supplied for your wheel range.
The process measures the wheel-face profile and prepares a cutting path for operator review. Machining removes material, so the wheel’s condition, previous cuts, and permitted remaining dimensions must be checked before work begins. Face cutting does not establish structural suitability for a damaged wheel.
Wheel Capacity and Machine Specification
The table lists a maximum alloy wheel size of 720 mm (28 inches), a 770 mm swing over the bed, a 12-inch three-jaw chuck, and a spindle speed range of 50–2000 rpm. Confirm wheel width, offset, center mounting, jaw engagement, and tool clearance; swing over the bed is not the same as usable wheel capacity.
Review the Supplied Configuration
The listed equipment includes automatic lubrication, a cooling system, an enclosed safety door, tools, and a toolbox. Confirm the exact controller, probe, soft jaws, guards, and supplied diamond tooling in the quotation. Use the operating instructions to establish mounting, speeds, feeds, and cutting allowance.
Plan the Workshop Installation
The machine size is listed as 2140 × 1600 × 1860 mm (L × W × H), with 7.5 kW motor power. Review floor loading, electrical supply, wheel handling, coolant requirements, and service access for the installed configuration.
Request a WRC28 Quote
Provide wheel diameter and width, alloy, offset, mounting details, photographs of typical wheel faces, target finish, and required output. Inovatec can review fixtures, tooling, profile measurement, training, and the proposed inspection process.