WRC28VM Vertical CNC Alloy Wheel Diamond Cutting Lathe
- Technical Data
- Standard Configuration
- Video
| Model | WRC28VM |
| Max. swing over bed | 820mm |
| Max. process diameter | 780mm |
| Max. size of wheel repair | 30″ |
| Chuck diameter | 320mm |
| Spindle speed | 50-1500rpm |
| Cutting speed | 0.1-1000mm/min |
| Max. travel | X/Z: 410/400mm |
| Rapid speed | X/Z: 8000mm/min |
| Tool post | Manual 4-position tool post |
| Section of tool post | 25x25mm |
| Feed motor power | X/Z: 1.6kw/Nm |
| Linear guide nominal width | 30mm |
| Main motor power | 7.5kw |
| Weight | 1500kg |
| Dimension | 1500x1820x2050mm |
3-Jaws Chuck（With Special Soft Jaws)
Manual Quick Change Toolpost,four-station turret
Automatic lubrication system
Turning the cooling system
With probing system (TP300 Pioneer Sensing Probe TP300)
Diamond Cutter 1 set
CNC controller syntec brand
Full Enclose Security Door
Digital Optimization Software design for wheel
Training Video CD
Work Lighting System
Related Products
Vertical CNC Machining for Alloy Wheel Faces
The WRC28VM uses a vertical machine arrangement for face machining of suitable alloy wheels. The listed equipment includes a probing system, diamond cutter, manual four-position toolpost, three-jaw chuck with special soft jaws, and wheel-profile optimization software.
The described structure uses cast iron for the column, base, and slides, with treated guideway surfaces. Review the guideway arrangement and loading position for the supplied machine. Structural features alone do not establish a guaranteed service life or machining accuracy.
Verify the Usable Wheel Envelope
The specification lists an 820 mm swing over the bed, a 780 mm maximum processing diameter, a 320 mm chuck diameter, and X/Z travel of 410/400 mm. Confirm wheel diameter and width, offset, mounting, jaw engagement, and tool access against the actual wheel drawing.
The table includes a separate maximum wheel repair size entry. Confirm its application and the usable mounting envelope in the quotation instead of deriving wheel capacity from the model name alone.
Probing, Toolpath, and Cutting Conditions
Profile probing supplies geometry for preparing the cutting path. The operator needs to review the measured curve, wheel condition, tool clearance, and permitted material removal. The spindle speed is listed as 50–1500 rpm; set operating conditions from the equipment instructions and the actual job.
Inspect cracks, deformation, previous cuts, and applicable wheel repair restrictions before machining. Diamond face cutting is a surface process and does not establish that a structurally damaged wheel can return to service.
Installation and Supplied Equipment
The table lists 7.5 kW main motor power, 1500 kg weight, and dimensions of 1500 × 1820 × 2050 mm. Review floor loading, wheel handling, electrical supply, coolant, and service access. Confirm the controller, probe, diamond cutter, enclosure, lighting, training materials, and other included equipment.
Request a WRC28VM Quote
Provide wheel drawings or dimensions, alloy, offset, mounting details, typical surface condition, target finish, and required output. Inovatec can review loading, fixtures, tools, controls, training, and the proposed machining scope.