YS Series Wet Blasting Cabinets for Alloy Wheels
- Technical Data
- Video
| Model | YS1010W | YS9065W | YS1212W |
| Fabricate Material | Stainless Steel SUS304 | Stainless Steel SUS304 | Stainless Steel SUS304 |
| Machine Size L*W*H | 1000*1400*2100mm | 900*650*750mm | 1200*1600*2200mm |
| Operating dimensions L*W*H | 1000*1000*750mm | 900*950*1700mm | 1200*1200*800mm |
| Entrance Door Size | W900mm*H650mm | W500*H590mm | W1100mm*H700mm |
| Working Pressure | 3-7bar(kg/m²) | 3-7bar(kg/m²) | 3-7bar(kg/m²) |
| Air Consumption (Approx) | ~1.5m³/min Pressure | 1.0m³/min; Pressure 3-7bar(kg/m²) | 1.5m³/min Pressure 3-7bar(kg/m²) |
| Quantity of Gun | 1pc | 1pc | 1pc |
| Nozzle Diameter | 1pc; diamater 10mm | 1pc; diamater 8mm | 1pc; diamater 10mm |
| Load Capacity | 60Kg | 60Kg | 60Kg |
| Machine Lighting | 18W*2pcs | 18W | 18W*2pcs |
| Total Weight (Approx) | 500kg | 350kg | 600kg |
| Power Supply | 380V/50Hz/3phase; 1.5kw | 380V/50Hz/3phase; 1.5kw | 380V/50Hz/3phase; 1.5kw |
Related Products
Wet Blasting for Wheel Cleaning and Preparation
Wet blasting, also called vapor blasting, combines abrasive media with water and uses compressed air to direct the slurry onto the workpiece. The YS cabinets are described for cleaning and preparing suitable wheel surfaces. The finish depends on abrasive selection, pressure, wheel condition, and the actual process.
Compare the Listed Cabinet Configurations
The table lists YS1010W, YS9065W, and YS1212W with SUS304 stainless steel construction, one blast gun, a 60 kg load capacity, and model-specific cabinet, working-space, door, and nozzle dimensions. Verify the wheel and support arrangement against the complete loading envelope.
The page title also refers to YS9080W. Confirm the intended model designation and dimensional drawing in the quotation, especially where the overall and operating dimensions need clarification.
Confirm Utilities and Operating Conditions
The listed power supply is 380 V, 50 Hz, three phase, with a 1.5 kW rating. Review the actual air consumption, pressure controls, nozzle, slurry circulation, water supply, and electrical requirements. Confirm pressure units and operating settings from the supplied instructions.
Plan Rinsing, Drying, and the Next Process
Establish the abrasive, slurry condition, rinsing, and drying requirements for the wheel material and intended finish. Review residues and cleanliness before polishing or coating. Wet blasting changes the surface; it does not establish that a damaged wheel is structurally suitable for reuse.
Request a Wet Blasting Configuration
Send wheel dimensions and weight, alloy, existing coating or contamination, target finish, daily workload, and available utilities. Inovatec can review cabinet access, loading support, abrasive, air supply, circulation, cleaning, and operator training.
